Product Description

  • Supply & installed price stated is our base installation price for supplying and installing the exact same model in the exact same location.
  • Price presumes that the current installation complies with current plumbing and gas by-laws in regards to location and valves.
  • Prices include a licensed electrician to perform a straight forward reconnect.
  • Prices are applicable to Perth metro only and subject to change.
  • Any works over and above those described are subject to extra charges which will be quoted prior to commencement.
  • Plumbdog provides a workmanship warranty on the installation only, any system warranty issues are covered by the manufacturer.
  • Product information and photos on this website may be used as a guide only and may vary slightly, it is the responsibility of the customer to check product specifics with each manufacturer directly using the product links.
  • Plumbdog staff members are happy to help you choose which product may be suitable for your needs however the final decision is to be made by you the customer, and no liability will be accepted.
  • Terms & conditions apply

Stiebel Eltron DHB-E 18 AU

- From $1,442.65 inc. GST

(Supplied & Installed)

FREE QUOTES – Call to get your free quote

ENQUIRE NOW OR CALL 1300 884 146

Get a free quote
SKU: DHB-E 18 AU Category:
ControlledElectronically
Electrical Loading19.4 Kw / 27 Amps per Phase (#3 Phase)
Maximum Temperature60c
Minimum Flow Rate3 L/pm
Maximum Temperature at 6 L/pm45c
Suitable For1 Shower
Manufacturers Parts & Labour Warranty (Domestic)5 Years
Recommended Service Schedules2 Years
Cold Water Connection15 mm
Hot Water Connection15 mm
Height478 mm
Width225 mm
Depth105 mm
Link to Manufacturers Product Pagehttps://www.stiebel.com.au/dhb-e-instantaneous-3-phase-water-heater
Request a product quote
    • Date Format: DD slash MM slash YYYY
    • * Plumber ARRIVAL time: A notification will be sent to you around 30 minutes prior (to save you peering through their window like a lost puppy)
  • This field is for validation purposes and should be left unchanged.