- Price is for supply & installation of the unit only (Australia wide, metro).
- A base installation price has already been included. Installation prices may differ depending on the complexity and additional requirements of the installation job. Contact Plumbdog for a FREE quote (Western Australia, Joondalup to Mandurah).
- Hot water systems should be installed by a licensed plumber / gas-fitter, otherwise warranties may become void.
- A tempering valve may be required particularly when changing type or size of system.
- Any warranty issues are covered by the manufacturer, and would need to be contacted directly.
- If you do not regularly service your appliance you may void the manufacturer’s warranty.
- Product information and photos on this website may be used as a guide only and may vary slightly, it is the responsibility of the customer to check product specifics with each manufacturer directly using the product links.
- Plumbdog staff members are happy to help you choose which product may be suitable for your needs however the final decision is to be made by you the customer, and no liability will be accepted.
- Terms & conditions apply
Stiebel Eltron DHB-E 13 AU
- $1,231.33 inc. GST(Supplied & Installed)
Supply & Install price from Only $1,231.33
FREE QUOTES – Call to get your free quote
ENQUIRE NOW OR CALL 1300 884 146
|Fully Installed From (Inc GST)||1231.33|
|Electrical Loading||Electrical Loading|
|Maximum Temperature||Maximum Temperature|
|Minimum Flow Rate||Minimum Flow Rate|
|Maximum Temperature at 6 L/pm||35c|
|Suitable For||1 Sink|
|Manufacturers Parts & Labour Warranty (Domestic)||5 Years|
|Recommended Service Schedules||2 Years|
|Cold Water Connection||15 mm|
|Hot Water Connection||15 mm|
|Link to Manufacturers Product Page||https://www.stiebel.com.au/dhb-e-13-au-instantaneous-3-phase-water-heater|